In a perfect world, you should be able to put ink in the press and simply run a job. Unfortunately, every year flexo and gravure printing operations waste ink, substrate and press time trying to get color right. Although advancements in technology have made it easier to achieve color accuracy, the variables that affect color still exist.
In this three-part series, we’re sharing over two dozen reasons your color might be wrong on press. If you missed the first article – Instrumentation – check it out first.
Today we’re looking at how your standards and ink can affect final color.
K 2016 begins today in Düsseldorf and runs through October 26th. As the #1 trade fair for the plastics and rubber industries, it’s a huge event featuring industry news, product demos, and networking.
We’ll be in Hall 8b / Stand H65 showcasing our end-to-end X-Rite Pantone workflow solutions to help rubber manufacturers, compounders, masterbatchers, and converters get consistent color in a plastics workflow. Don’t miss your chance to speak with our color experts! (Here’s the best way to request a demo.)
From the North Entrance, simply turn left, head down the escalators, and Hall 8b will be on your right. We’ll be in Stand H65, waiting to meet you!
Whether you’ll be at K 2016 in person or staying abreast via social media, today’s blog is dedicated to showing how a complete X-Rite Pantone solution, including the ability to digitally communicate color based on spectral values, makes it faster, easier, and less expensive to more consistently manage color in your plastics workflow.
Recently, we published an article about measuring color inline. Coil coating is one area where inline color measurement is very effective for achieving the most cost benefit by focusing on speed, quality, and accuracy.
The coil coating process has been around for more than 30 years, allowing companies to produce durable and attractive products. However, to achieve cost benefit, the focus must be on speed, quality and accuracy. Coil coating gives manufacturers a way to paint the metal while it is still in sheet form. This is important, because trying to paint metal after it has been formed into parts makes it difficult to achieve a uniform coating.
The coil coating process is fast, and mistakes must be caught immediately to avoid expensive waste. X-Rite’s Coil Coating Inline Color Measurement System incorporates the ERX50 or the TeleFlash® 445 Inline Spectrophotometer and the GlossFlash 6060 Inline Gloss Meter to help manufacturers ensure color and gloss quality and consistency, real-time, during each step of the process.
Today we’ll explore the coil coating process and learn how an inline system can help achieve quality and accuracy.
X-Rite’s inline color measurement solutions help industries manage color as the product is being made. Inline systems monitor products as they are produced and alert operators as soon as color begins to move out-of-spec so corrections can be made before the product is wasted.
The TeleFlash445 spectrophotometer mounted on a traversing beam is automatically measuring the left, middle and right side of this sheet during production.
Each X-Rite inline color measurement system uses a non-contact spectrophotometer and ESWin software. Depending on the application and needs, a system may include a moving frame or robotic arm to position the spectro. Although they work as standalone units, X-Rite’s inline solutions can communicate with process control systems to provide color measurement data, or dye pump controls for real time Closed Loop Color Corrections. A system may also receive signals about events such as reel/sheet changes, machine stops or meter counts. Networked data allows you to share color standards and measurements among systems and at different locations.
Today we’ll look at how industries such as paper, textiles, plastics, glass and automotive are using X-Rite’s inline measurement solutions.